If you live off Wilson Mills, near Bishop Road, or by Highland Heights Community Park, you know how fast a small home issue can derail your day with our humid summers and lake-effect winters here in Highland Heights, especially if you live up near Whiteford Park, where the pollen can get pretty heavy in July.
That’s why it helps to have a local, go-to team you can trust for all your HVAC needs, from plumbing and heating to AC. We work all through the Northeast Ohio area at Kobella, and have been for the last 10 years. We’ve got you covered with repairs, replacements, and maintenance to keep your home running right.Â
Need help now? Book your appointment in a couple of clicks.Â
High-Quality Plumbing Services in Highland Heights
Our team of licensed plumbers handles a full range of repairs and installs:
- Fixtures
- Water heaters
- Sewer/drain
- Sump pumps
- Gas
- Water lines
- And more
Start here and see the full plumbing menu:
Kitchen Plumbing
Updating a kitchen near Alpha Park? Dealing with a surprise leak on Brainard Road? Our team’s ready for whatever you can throw at us and offers complete kitchen plumbing repair and installation, from unclogging drains and fixing leaky faucets to installing disposals and sinks.Â
If you’re planning a remodel, we’ll make sure that all your new fixtures and appliances integrate properly with your existing plumbing and talk you through options that fit your space and budget.Â
Backflow Prevention
Protect your drinking water with backflow testing and prevention devices that stop contaminated water from entering your home’s potable lines. We install and service these systems and can advise you on code-compliant solutions for your property.
Water Lines
From repairing a leak under the lawn to connecting a home to municipal water, we’re your go-to source for water line repairs and new connections. That also includes working with local authorities and health departments to secure permits and meet code.
And again, that’s not all we do. We also service sewer and drain (camera inspections, repairs), sump pumps, well pumps, gas lines, water treatment, and more across Northeast Ohio, so don’t forget to check out the rest of our services.
Expert Heating for Highland Heights Homes
2° F in January works when you’re all wrapped up outside or if you’re driving down I-271, but not when you’re sitting in the house after work, freezing all night. You want a heating partner who keeps things efficient and safe. For the full overview, check out our heating services.Â
Furnace Maintenance
Annual tune-ups help your furnace run how it’s supposed to, but they also extend the system’s life. Our team at Kobella provides comprehensive furnace maintenance for Northeast Ohio homeowners. We’re mainly looking to catch issues early and keep your airflow and combustion components in check.
Heating Repair
If your home starts feeling chillier than usual, or your system makes odd noises, our team provides professional heating repair (furnaces, boilers, heat pumps) across Lake and Geauga County areas (and nearby Highland Heights). We diagnose issues and get your heat restored quickly.
Heat Pumps
Interested in year-round comfort from a single system? Kobella offers heat pump installation, repair, replacement, and maintenance. That’s a high-efficiency option that can handle both summer cooling and winter heating!
We also handle heating installation/replacement and seasonal heating maintenance, which we recommend you do before the first real cold front.Â
Highland Heights Cooling & Air Conditioning Services
We know the average 28° F we get in Highland Heights isn’t crazy, but when that July humidity kicks in after a day at StoneWater Golf Club, you want AC that just works without any hassle.Â
Kobella provides AC repair and maintenance throughout our service area so your home stays cool and comfortable. Start here with our AC services.
AC Repair
Warm air from the vents? Short cycling? Our technicians provide quick AC repairs with clear communication and upfront guidance on whether repair or replacement is the best option for your situation.
We want to be fully transparent here, so that you get the best bang for your buck.Â
AC Installation
If you know it’s time to upgrade, Kobella also performs AC installation and replacement. We’ll get your home on a more efficient system that works better and costs you less money, so you can use it all summer long without any guilt..Â
AC Maintenance
Prevent any surprise breakdowns and keep your efficiency high with seasonal AC maintenance. It’s the simplest way to cut operating costs and extend equipment life before the peak heat arrives.Â
Also, ask us about ductless mini-splits and heat pumps, which give you better comfort and energy savings throughout the year.Â
Why Choose Kobella?
See what makes our team stand out:
- Kitchen to Main Line Expertise: From kitchen plumbing to backflow devices and water lines, our service pages spell out exactly what we do.
- Heating Pros for Every Season: We handle everything from furnace maintenance and heating repair to heat pump installations, so your home stays comfortable when temps swing.
- AC You Can Count On: Full-service AC repair and installation services, with guidance on the right path for your home and budget.
- Local, Easy to Reach: Based in Chesterland and proudly serving all throughout Northeast Ohio. Call or book online anytime.Â
Ready for Comfortable, Worry-Free Living?
Live near Mayfield Road? Along the Aberdeen area? Wherever you’re based in Highland Heights, our team’s got all your plumbing and HVAC interests in mind. From kitchen leaks and water line fixes to furnace tune-ups and AC installs, we keep things simple and done right the first time.Â
Let’s get you on the schedule. Tell us what’s going on and we’ll take it from there:Â
Recent Jobs and Reviews in Highland Heights, OH
Highland Heights, OH at a glance
Kobella Plumbing Heating and Cooling has completed 20 jobs in Highland Heights, OH between June 2026 and July 2026.
The most recent job was on July 13, 2026.
Kobella Plumbing Heating and Cooling has completed 70 jobs in Highland Heights, OH in the last 12 months.
Job Locations and Reviews
Completed 50-foot hand excavation to replace failed perforated drainage pipe from yard drain to main line with solid PVC pipe. Removed deteriorated corrugated flexible tubing and installed new solid pipe to prevent future infiltration issues. Backfilled trench with excavated soil, which will require natural settling time; dry weather conditions were maintained throughout the project to ensure proper installation.
Completed HVAC system evaluation for equipment replacement estimate. Assessed existing outdoor condensing unit positioned against exterior brick wall and documented current ecobee smart thermostat installation with multi-stage wiring configuration including Rc, C, Y1, Y2, O/B, Rh, W1, W2, and PEK terminals to determine compatibility requirements for proposed replacement system.
Completed cooling maintenance club member visit on outdoor condensing unit. Removed access panel and performed system diagnostics using digital manifold gauges to verify refrigerant pressures and system performance. Measured supply air temperature at 59.9°F using infrared thermometer, confirming proper cooling operation. Inspected compressor, refrigerant lines, electrical connections, and capacitor. System operating within normal parameters with no immediate repairs required.
Conducted replacement estimate for 29-year-old Carrier air conditioning system that is no longer operational, affecting cooling throughout entire home. Assessed existing indoor Payne furnace with air handler and outdoor Carrier condensing unit, documented current equipment configuration and condition, and provided comprehensive replacement options for complete system upgrade.
Responded to emergency no-cooling call for ten-year-old air conditioning system. Upon arrival, performed diagnostic testing using digital multimeter to measure electrical values, with readings indicating potential component failure or electrical issue within the HVAC unit. Inspected system components including refrigerant lines, brass fittings, and associated mechanical equipment to identify root cause of cooling failure.
Responded to service call for recently installed American Standard A/C system experiencing inadequate cooling performance and temperature differential between floors. Inspected and verified Z-Wave temperature sensor (Model ZSEN8300AVWOMAA) installed in master bedroom, confirmed sensor is online and properly communicating with UX360 thermostat with both temperature and humidity monitoring enabled. Documented sensor configuration settings and battery condition, photographed thermostat interface showing assigned sensor status and serial numbers for follow-up consultation with manufacturer technical support regarding system performance concerns.
Completed return service call to install filter cabinet and perform AC system maintenance. Installed new filter cabinet assembly and verified proper fitment and seal integrity. Conducted comprehensive air conditioning maintenance including system inspection and performance verification. Measured and documented environmental conditions using calibrated instruments. Recorded supply air temperature at 61.4°F and ambient relative humidity at 71.2% RH in the mechanical space. Verified temperature split across evaporator coil within acceptable parameters for current operating conditions. Inspected ductwork insulation and confirmed proper sealing of all connections. All components functioning as designed with no deficiencies noted. System operating efficiently and ready for continued service.
Replaced two leaking frost-free outdoor spigots with new fixtures to restore proper operation and prevent water waste. Performed pressure testing on flow valve which indicated elevated pressure readings, and enrolled customer in maintenance club membership for ongoing service benefits.
Completed full HVAC system installation including outdoor condensing unit and indoor air handler with DiversiTech mounting components. Installed new outdoor unit on gravel pad against exterior wall with proper leveling verified, mounted electrical disconnect box, and ensured all equipment was properly secured and operational per manufacturer specifications.
Completed hydro jetting service for main sewer line cleanout. Excavated and accessed underground cleanout point, deployed high-pressure jetting equipment to clear blockage and restore proper drainage flow. Backfilled excavation area and restored ground surface upon completion of cleaning operation.
Cleared clogged tub drain by removing accumulated debris and buildup from the drain assembly. Additionally, replaced the worn shower diverter on the Moen tub and shower fixture to restore proper water flow control between the tub spout and showerhead.
Performed sewer line camera inspection to assess condition and identify potential causes of backup issues. Utilized electronic locating equipment to trace and map underground sewer line path, documenting depth and location measurements at 110 feet 3 inches from access point. Inspection revealed system conditions requiring preventative maintenance recommendations to mitigate future backup risks.
# Outdoor Spigot Leak Repair Responded to a slow leak originating from an outdoor spigot supply line. Accessed the affected piping through an interior ceiling cavity above a basement living area, requiring drilling through wooden framing members to locate and repair the compromised pipe section. Successfully resolved the leak and restored proper water flow to the exterior fixture.
Completed ductwork modifications to accommodate repositioned air handler in attic space. Identified missing air filter bracket requiring installation and noted evaporator coil requires cleaning for optimal system performance. Documented existing flexible ductwork configuration and insulation conditions in confined attic area.
Performed inspection of HVAC system and identified missing air filter bracket requiring installation. Assessed evaporator coil condition and determined cleaning service needed to restore optimal airflow and system efficiency. Documented equipment conditions with photographs for customer records and future maintenance reference.
Conducted on-site evaluation for complete air conditioning system replacement. Assessed existing HVAC equipment located in bedroom utility closet, including furnace, air handler, and Aprilaire humidifier unit. Documented current system configuration, ductwork connections, and installation space constraints. Provided replacement options and equipment recommendations based on existing infrastructure and customer requirements.
Responded to service call for thermostat displaying error code 114 and continuous blower operation even when system was switched off at furnace disconnect. Upon inspection, located failed fuses in exterior disconnect box. Replaced defective fuses with new Buss-Tron fuses, restoring proper system operation and resolving thermostat error code.
Completed cooling maintenance club visit on air handler system. Performed thorough inspection of ductwork assembly, noting weathered galvanized sheet metal with water staining and normal wear patterns consistent with system age. Examined return air filter, which showed dust accumulation and discoloration indicating active use. Verified proper filter placement within housing and confirmed all mounting brackets and fasteners were secure. Documented system condition through photographs for maintenance records.
Responded to report of intermittent clunking sounds from bathroom toilet and bathtub backing up. Upon inspection, diagnosed drainage system issue affecting bathroom fixtures. Cleared blockage in main drain line to restore proper drainage flow and eliminate backup condition. Verified toilet operation and confirmed elimination of unusual sounds. Tested bathtub drainage to ensure complete resolution of backup issue and proper water flow through drain system.
Returned to property to complete installation of new shower cartridge and pressure reducing valve (PRV) as previously sold. Accessed shower valve assembly through existing wall opening, removed old worn cartridge showing mineral deposits and corrosion, and installed replacement cartridge. Inspected PRV and associated plumbing connections in water heater compartment, verified proper operation of gas valve assembly and copper piping connections. All components tested and functioning properly upon completion.
