Chagrin Falls Plumbing, Heating & Cooling

Responded to emergency call from Andrew Goldsword regarding frozen pipes. Upon inspection, accessed crawl space to assess plumbing system where significant cobweb accumulation was observed. Successfully thawed frozen pipes, restoring normal water flow to bathroom fixtures. Verified proper operation by testing sink faucet, which demonstrated appropriate water pressure and function.

Responded to service call for clogged garbage disposal (PRO 77 Quiet System model). Inspection revealed significant debris buildup and brownish staining inside the disposal drain. Successfully cleared the clog and restored proper drainage functionality.

Returned to site to complete the sold repair work involving replacement of the boiler ice melt slab sensor as previously arranged by Matt. Successfully installed and tested the new sensor, confirming proper functionality through diagnostic readings on the Fieldpiece measurement device. The Noble Fire Tube Combi system's electronic control panel now displays normal operational parameters with no error codes present.

Performed winterization service by shutting off outdoor spigots to prevent freezing. Inspected valve assemblies and copper supply lines to ensure proper operation and shut-off capability.

Installed new flexible yellow gas line with proper brass fittings to supply gas to customer's dryer. Connected line from existing black pipe with valve to the appliance, ensuring secure connections and proper routing through the utility area.

Returned to customer's residence to complete installation of previously sold pump and tank saver system. Successfully installed pressure switch and connected necessary electrical components to the existing water pressure system. System was properly integrated with the home's plumbing infrastructure including connection to filtration equipment and pressure tank, with all components tested and confirmed operational.

Completed installation of new sanitary stack repipe as previously sold. Work involved accessing plumbing through bathroom wall adjacent to toilet and installing new PVC drainage system in basement area with proper joints and connections to existing plumbing infrastructure. All vertical and horizontal sections were properly secured to structural framing.

Responded to service call for 5-year-old heat pump system not reaching set temperature despite recent thermostat replacement. Diagnostic inspection revealed the system was properly engaging auxiliary heat mode (confirmed on Honeywell Home thermostat display showing "AUX Heat On") when attempting to raise temperature from 67°F to 72°F. Inspected American Standard electrical panel for proper connections and operation. System now functioning correctly with appropriate temperature differential.

Performed comprehensive tune-up on 15-year-old air handler. Replaced air filter with new clean unit featuring diamond-pattern mesh design. Inspected ignition system components including electrode/igniter and verified proper connection of pipe assembly with rubber gaskets and metal clamps. All systems functioning within normal parameters after service.

Responded to customer complaint that furnace was not keeping up with heating demands. Performed electrical diagnostics using Fieldpiece SC460 multimeter, measuring approximately 2.5 amps on blower motor circuit. Inspected internal wiring connections and verified proper grounding of components to resolve performance issue.

Installed customer-supplied electric water heater in crawl space. Removed old unit and connected new Rheem water heater to existing plumbing and electrical systems. Completed connections to supply lines and verified proper operation before finalizing installation.

Completed annual plumbing membership service visit with successful installation of new water heater. Unit properly mounted with copper piping connections and verified operational. Existing water filtration system remains in place adjacent to the new installation.

Repaired leaking hot water faucet in laundry tub. Used pipe cutter to access affected area and installed pressure gauge to verify system pressure after repair was completed. Successfully eliminated leak and restored normal water flow.

Returned to complete previously sold repair work to replace a failing oil union. Successfully removed the old brass fitting and installed a new copper-brass union on the line, ensuring proper connection and sealing. Tested the system after installation to confirm no leaks and proper operation.

Responded to recurring toilet leak issue affecting basement area. Diagnosed clog in main cleanout of cast iron drain pipe system. Cleared obstruction and inspected T-junction connections for proper function. Noted water damage on basement wall requiring monitoring for potential mold development.

Responded to customer complaint of mini-split system error code indicating high pressure switch off. Observed COSTWAY mini-split system with significant frost/snow accumulation on outdoor unit. System was installed by homeowner in exterior office space. Performed defrost cycle and cleared ice buildup from outdoor unit to restore proper operation and resolve high pressure fault.

Diagnosed and serviced snow-melt system for driveway that was non-operational with control panel indicating error via blinking lights. Performed electrical testing with multimeter on control board connections and verified proper voltage to system components. Traced issue to faulty zone valve actuator controlling driveway loop while confirming garage and sidewalk zones remained functional.

Returned to customer's residence to install the upgrade filter cabinet previously sold by Greg. Installed cabinet into existing HVAC system with proper connections to ensure optimal indoor air quality. System was tested after installation and is functioning correctly with improved filtration capabilities.

Responded to callback for non-functioning fan in manual mode on 65W air handler. Diagnosed issue with electronic control board showing "EOF" error code on display. Inspected and corrected electrical connections, focusing on the wire connections at junction points. System now functioning properly in all modes.

Completed toilet flange and bend replacement as previously sold. Upon arrival, found the subfloor had been removed as requested, revealing significant water damage and discoloration around the drain area. Installed new PVC p-trap assembly and properly secured the plumbing components to ensure proper drainage and prevent future leaks.