When something goes wrong at home (no hot water, a grinding disposal, a boiler that won’t cooperate), it throws off everything. And it doesn’t help that Moreland Hills experiences such fluctuating weather at different times of the year, from 23° F in January to about 80° F in July.
We get that those aren’t extreme temperatures, but it does mean we’ve got to have a plan for both ends of the spectrum. This is where having a local team, based right around the corner in Chesterland, can be so helpful. Our veteran-owned team has been helping homes in Northeast Ohio for over 10 years, so we know a thing or two about reliable plumbing, heating, and cooling services.
We make sure the job’s done right the first time, and we back that with our satisfaction guarantee.
Ready for help now? Schedule service online, and we’ll take it from there.
Reliable Plumbing Services in Moreland Hills
From homes tucked along Chagrin River Road to neighborhoods just off Miles Road, we’re well aware that plumbing issues don’t wait. Our team provides everything from repairs and replacements to new installs across the whole region, whenever you need them.
Tankless Water Heaters
Love an endless hot shower after a muddy hike at Lang Pavilion? A tankless system gives you hot water on demand while also saving space. We provide tankless water heater repair and installation that’s backed by experienced, local technicians.
And keep in mind that tankless units still need periodic flushing so that any mineral buildup can be removed, which is typically done yearly, depending on water hardness. Fortunately, our team can handle that for you during maintenance.
Garbage Disposals
Got some of your friends or family round after a day at the Chagrin Valley Country Club? Keep all your cleanup easy with a smooth-running disposal. Kobella offers garbage disposal repair and installation across the Greater Cleveland area.
Water Lines
We’ve noticed that some of the homes near wooded lots and older stretches by Chagrin River Road sometimes have aging or galvanized water lines, which ends up being a way more expensive problem if they burst down the line.
Our team can repair and replace main and interior water lines, which includes updating galvanized to copper or PEX and addressing any pinhole leaks.
And that’s just the start; we handle all your broader plumbing needs, too. See our full plumbing lineup (bathroom, kitchen, water heaters, water treatment, and more).
Lasting Heating for Moreland Hills Homes
Like we talked about earlier, winters get real up here, especially in the river valley by South Chagrin Reservation. This means reliable heat matters. Whether you’re along Sterncrest Drive or closer to Hiram Trail, you’ve got us in your corner to keep your house warm this winter.
Boiler Repair
Notice how it’s always your radiator or boiler that acts up right when you need it the most? We’d always suggest that you test it out a couple of times in the summer, when you don’t need it desperately. But whenever you notice issues with your heating, we’ll diagnose and fix it quickly.
Our team provides trusted boiler repair with skilled techs at affordable rates, and we also offer installation and maintenance.
Heating Installation
Reckon it’s about time that you replace an aging furnace, heat pump, or boiler? It can be a bit tricky to tell which one makes the most sense for your home and budget, so we’ll help recommend the right system and then install it to spec.
Heat Pump Maintenance
Heat pumps are awesome for year-round comfort. Just make sure you keep them tuned! Our heat pump maintenance covers:
- Refrigerant checks
- Airflow
- Electrical
- Thermostat calibration
- Reversing valve inspection
- Lubrication
- Full cleaning
We want to keep them functioning properly so you’re spending less money but staying warm reliably.
We also handle routine heating maintenance and fast repairs across Lake and Geauga counties, so check out the rest of our heating services.
Moreland Hills Cooling & Air Conditioning Services
When summer humidity rolls in after a day at the Polo Field or a trail run near Sulphur Springs, you want cool, even airflow. That means no hot spots, no surprises. We’ve got you covered.
AC Repair
From odd noises to short cycling, Kobella delivers fast, reliable AC repair. All our pricing is transparent, and we’re even committing to a 100% satisfaction guarantee!
Ductless Air Conditioning
No ducts? That’s no bother. Ductless mini-splits are ideal since they bring targeted comfort to all your sunrooms or additions, wherever you want them. Learn how ductless can fit your home.
AC Maintenance
Stay ahead of breakdowns and keep your energy bills in check with our seasonal AC maintenance. We’ll get you set for the hottest weeks of July and August. Details and scheduling.
Curious about what other cooling options (including heat pumps or ductless replacements) we provide? Start here: Air Conditioning Services.
Why Choose Kobella?
What’s so special about our services?
- Veteran-Owned, Local Pros: We’re a veteran-owned company serving Greater Cleveland, Lake and Geauga counties. Close by and easy to reach when you need us.
Satisfaction Guarantee: We back our work with a 100% satisfaction guarantee, so you can book with confidence.
Upfront Pricing: No surprises, since you’ll know the cost before work begins.
Full-Service Convenience: One call for tankless water heaters, water lines, boilers, AC, ductless, heat pumps, and more. We do everything from installations and repairs to maintenance.
Let’s Get Your Home Comfortable Again
You deserve a home where you’re not constantly thinking about how uncomfortable you’ll be at various times in the year, whether you’re near the Chagrin Valley Country Club between Miles and Chagrin or you spend weekends at Look About Lodge. So, from emergency fixes to proactive tune-ups, Kobella makes it easy to check this off your list.
Tell us what’s going on, and we’ll jump on it: Schedule your Kobella service. We’ll get you back to normal, quickly.
Recent Jobs and Reviews in Moreland Hills, OH
Job Locations and Reviews
Responded to no hot water complaint and serviced wall-mounted Navien tankless water heater system. Removed front cover to inspect internal components including heat exchanger assembly, valves, control mechanisms, and expansion tank. Diagnosed issue, performed necessary repairs to restore hot water functionality, and verified proper system operation before completing service call.
Responded to clogged kitchen sink complaint and performed diagnostic inspection of drainage system. Upon examination of under-sink plumbing, identified blockage in P-trap assembly connected to garbage disposal unit. Disassembled P-trap components, cleared accumulated food debris and grease buildup causing obstruction, and reassembled drainage piping. Tested water flow through system to verify proper drainage function and confirmed no leaks at connection points.
# HVAC Maintenance and Component Replacement Returned to property to complete coil cleaning, insulation replacement, and capacitor installation on outdoor condensing unit. Upon arrival, conducted visual inspection of equipment which revealed heavily soiled evaporator coil and air filter with significant accumulation of dirt, dust, and environmental debris. The filter exhibited extended service life beyond recommended replacement interval, with visible particulate matter restricting airflow throughout the system. Proceeded with thorough coil cleaning using appropriate cleaning solution and equipment to remove built-up contaminants from coil surfaces and fins. Restored proper heat transfer efficiency by eliminating debris that had accumulated on both indoor and outdoor coil assemblies. Replaced deteriorated or damaged insulation on refrigerant lines to prevent energy loss and condensation issues. Installed new capacitor to replace failed or degraded component, ensuring proper electric
Completed mini split installation with proper refrigerant line connections using copper piping and brass compression fittings secured to the air handler unit. Verified level installation of exterior components and ensured all mechanical connections were properly assembled per manufacturer specifications.
Completed installation of whole home dehumidifier system in basement utility area. Unit was mounted and integrated with existing HVAC infrastructure, including connection of refrigerant lines, PVC drainage piping, and electrical controls. System tested and operational upon departure.
Responded to service call regarding second floor AC return air issues. Accessed attic space and inspected return air system configuration. Documented existing conditions with photos showing vaulted ceiling area with wooden planking and adjacent storage space where return air ducting is located. Identified access point through utility closet area with exposed wiring and ductwork. Further diagnostic work required to determine proper resolution for return air flow concerns.
Completed routine cooling maintenance for club member. Performed system diagnostics using refrigerant manifold gauge to verify proper operating pressures and temperatures, with readings indicating system performing within normal parameters. Documented equipment conditions with photos for service records.
Responded to high water usage concern at 20-year-old residential property following previous sprinkler system repair. Conducted comprehensive interior leak detection survey using digital humidity meter to identify moisture anomalies in concealed areas including crawl space and mechanical spaces. Inspected plumbing infrastructure, accessible piping, and potential problem areas common to homes of this age. No active leaks were visually identified during the inspection period, though elevated moisture readings were documented in utility areas for further monitoring.
Responded to customer concern regarding insufficient heating. Performed system diagnostic and refrigerant charge verification on air conditioning unit. Thermostat displaying 73°F ambient temperature with setpoint at 65°F, indicating system operating within normal parameters at time of inspection.
Completed return visit for hose bib installation on northwest side of residence. Installed new copper supply line in crawl space, properly secured piping to wooden joists with appropriate hangers and brackets, and ensured proper insulation clearance around new plumbing penetrations. Verified water flow and tested new hose bib for leaks upon completion.
Completed second trip to address no heat condition caused by failed boiler switching relay. Installed replacement relay module and verified proper electrical connections to control board and transformer assembly. Tested system operation and confirmed heat restoration; however, intermittent issue may require additional troubleshooting and potential secondary component replacement pending further evaluation.
Responded to service call for leaking outdoor spigot and installation of new hose bib on opposite side of residence. Assessed existing spigot condition and determined replacement necessary due to valve seat deterioration causing persistent leak. Located optimal mounting position on alternate exterior wall to provide convenient water access for extensive garden irrigation needs. Accessed crawlspace to run new copper supply line from main water distribution system, securing pipe with appropriate hangers and maintaining proper slope for winterization. Installed frost-free sillcock with vacuum breaker to prevent backflow contamination. Removed failed spigot and capped supply line at original location. Tested both installations for proper operation and verified no leaks at connections. System pressurized and fully operational upon completion.
Responded to no-cooling call for bedroom AC unit. Upon inspection, diagnosed failed control board preventing unit operation. Removed and replaced defective control board with OEM replacement, reconnected all wiring harnesses, and verified proper electrical connections. Tested system operation at outdoor condensing unit, confirmed capacitor functionality and refrigerant line integrity. Unit now operating normally with proper cooling to affected zone.
Responded to service call for bathtub drainage issue caused by malfunctioning drain stopper. Upon inspection, confirmed the stopper mechanism was stuck in the closed position, preventing proper water drainage. Assessed the chrome-finished drain assembly and determined replacement of the stopper component would be necessary to restore full drainage functionality.
Responded to clogged toilet caused by foreign object obstruction. Upon arrival, customer reported a plastic disk had been flushed down the toilet. Successfully removed the obstruction and restored proper drainage function. Toilet tested and confirmed operational upon completion of service.
Completed cooling maintenance club visit on air handler system. Connected manifold gauges to service ports and performed refrigerant system diagnostics. Added UV dye to the system for future leak detection purposes and documented the service with notation on equipment cabinet. Inspected outdoor unit components, refrigerant line connections, and copper fittings for proper operation and condition.
Completed cooling maintenance for club member on air handler system. Performed thorough inspection of refrigerant line connections, ductwork, and condensate drainage system. Verified proper operation of furnace unit, checked all PVC venting and drain lines for proper routing and secure connections, and confirmed system controls functioning correctly.
Completed cooling maintenance on residential HVAC system and identified potential thermostat malfunction requiring replacement at the air handler. Inspected outdoor condensing unit positioned on concrete pad and documented equipment condition, noting age-related wear and corrosion on metal components and weathered manufacturer labeling.
Mapped and located septic line using electronic detection equipment, marking the line path with flags for customer reference. Additionally, installed new kitchen faucet with pull-down sprayer feature, ensuring proper connections and testing for leaks upon completion.
Responded to emergency call for sewage backup in residential property. Upon arrival, inspected backflow prevention device due to customer concern about potential obstruction. Investigation revealed significant accumulation of sewage and debris within the backflow assembly chamber. Interior walls showed extensive staining and residue buildup consistent with recent backup event. Dark wastewater was pooled at base of device, and interior surfaces displayed deterioration including flaking coating material and corrosion around sealing edges. Documented condition of backflow device interior showing heavy contamination and mineral deposits from prolonged exposure to sewage. Identified backflow device as source of backup issue requiring immediate attention to restore proper drainage function and prevent future sewage intrusion into residence.
